They all comply with the UNI EN 1065 European standard, they are able to guarantee high capacities. So what are the factors that help you choosing which prop to use?

GBM produces three different classes of heavy duty props, subdivided in several different models according to the maximum extension they can reach. The legislation DIN EN 1065 sets the standards that every component and every characteristic of the props has to meet, among them it is important to note the quality of steel, the data in the marking made by the producer, the extension of the items and above all the key factor: the Characteristic Strength that props need to have.

Acknowledging that this is the value that determines the capacity of a prop, that is obtained by dividing the characteristic strength for a factor of 1,65, here are the requirements of the various classes in details.

Class B props can only be classed as such if and only if in EVERY extension that they reach, the characteristic strength is higher or equal to the one provided by the legislation; the strength is given by the formula 68,0*l/l^2, where l means the extension of the prop expressed in meters.

To understand better what this means practically, creating a graph in which every value of l is substituted in the formula above, we obtain a curved line called line of the characteristic strength of class B props. In order to comply with the legislation, visually speaking, the prop needs to be placed in the area above the curved line (blue).

Class B props of GBM fulfil this condition widely, as illustrated by the lines representing these three models B30, B35 and B40.

Class D props can only be classed as such if and only if in EVERY extension that they reach, the characteristic strength is higher or equal to the one provided by the legislation; the strength is given by a fixed value of 34,0 Kn.

Turning this value into a graph we obtain a straight line called line of the characteristic strength of class D props; in order to comply with the legislation, visually speaking, the prop needs to be placed in the area above the straight line (blue).

Also in this case, Class D props of GBM fulfil this condition widely, as illustrated by the lines representing the five models D30, D30 ECO, D35, D40 and D55.

As in the case of class D, Class E props can only be classed as such if and only if in EVERY extension that they reach, the characteristic strength is higher or equal to the one provided by the legislation; the strengths is given by a fixed value of 51,0 kN.

Turning this value into a graph we obtain a straight line called line of the characteristic strength of class E props; In order to comply with the legislation, visually speaking, the prop needs to be placed in the area above the straight line (blue).

Also in this case Class E props of GBM fulfil this condition widely, as illustrated by the lines representing the three models E30, E35 and E40.

If you already know the extension and the capacity you need even before to use props, then yes, there is.

Consulting the table below, it is possible to understand which class(-es) of props is/are the ideal, based on the extension of use and on the capacity needed.

For instance:

1) Having to work at an height of 2,8 meters inside a building site, and needing a capacity of 19 kN, a class B prop may not be enough, since at that height nominally it has to have a capacity of at least 14,71 kN. In case of the GBM class B props, at that height, all the models would be proper, since they have the following capacities:

- 24,8 kN for the model B30;
- 21,1 kN for the model B35;
- 22,8 kN for the model B40.

2) Having to work at an height of 3,4 meters inside a building site and needing a capacity of 29 kN, class B props do not reach those capacities at such height so since the needed capacity is higher than the minimum one of the class D, a class D or E prop should be used. The GBM props that fulfil such capacities at the extension here required are the following:

- 31,9 kN for the model D40
- 39 kN for the model D55;
- 35,3 kN for the model E35;
- 41 kN for the model E40.

Ultimo aggiornamento:

GBM mentioned in the special: "Rassegna Batimat" by Il Sole 24 ORE, the most important Italian economic-financial newspaper.

At what distance should the props for sustaining a slab be positioned? Which is the appropriate class? How many props do I need for an appropriate work? These are not trivia questions. Here is a guideline to help you get the right answers.

GBM
congratulates its sponsored BMW driver, Toby Bradwolff, for the
splendid double win achieved in the Dutch Supersport championship at the
Zandvoort circuit.

Grace au progrès technique, un certain nombre de traitements du métal associés à l’industrie lourde sont en train de devenir de plus en plus “eco-friendly”. Étonnés ? Voilà pourquoi.

They all comply with the UNI EN 1065 European standard, they are able to guarantee high capacities. So what are the factors that help you choosing which prop to use?

Le standard le plus connu et le plus désiré par rapport au système de gestion de qualité? Nous l’avons. Et on vous explique pourquoi il peut faire la différence pour une entreprise qui produit des étais et de l’échafaudage certifiés.

Vous souhaitez recevoir de plus amples informations sur les produits GBM? N’hésitez pas à poser vos questions!