ANSI SSFI SH300 post shores

GBM heavy duty shoring systems, purposely made for the North American ANSI standard. They bear more than 16500 lbs.
Made in Italy. Certified in Germany. Used worldwide.

REQUEST A FREE QUOTE

Technical features of “ANSI SSFI SH300” post shore

Below are the features of GBM “ANSI SSFI SH300” heavy duty post shore:

  • forged steel adjustment ring nut with two supplementary holes, suitable for millimetric adjustment;
  • quick release system: made in C45, easier to insert into the holes thanks to the ergonomic shape;
  • anti-shearing system: the greater length of the inner pipe with respect to the outer one enables guaranteeing an at least 3.9 in. difference between the two so as to prevent injury;
  • outer threading obtained by means of rolling-forming, hence guaranteeing the wholeness of the material without removing any material;
  • inner holes obtained using machines capable of perfectly machining them or by means of a milling system which obtains turnings on the surface of the pipe: both ways enable guaranteeing the complete absence of burrs near the holes;
  • inner pipe anti-slip-off system, so as to prevent the pipe from inadvertently slipping off thus guaranteeing wholeness and safety when laying down and displacing at the worksite;
  • reinforcement at the foot: consisting in mounting an extra tube on the outer one in proximity of the lower plate;
  • three types of surface protections, obtained through the process of:
    • dip coating;
    • passivated electrolytic galvanising (tropicalisation), with guaranteed minimum thickness of 10 microns;
    • hot-dip galvanization, with guaranteed minimum thickness of 50 microns;

Upon request:

  • sticker customised with customer's logo, bearing information on capacity and maximum extension;
  • tripod stand capable of supporting the post shore when laying on site and when laying the floor;
  • three different types of fork for supporting the floor, depending on the manufacturer’s needs:
    • head stop fork (simple),
    • 4-way head,
    • fork referred to as "drop head".

Beware: the capacities indicated in the table always refer to the capacity of the single post shore. Higher capacities can be achieved by binding, gate-like systems or pipe-coupling systems. The gate-like system is a temporary structure suitable for creating a loading tower. Binding the post shores in fours enables maximising the capacity. The pipe-coupling system provides for a pipe above and beneath with couplings; it is the same figure of the gate, which is more economic though less quick.

GBM ANSI Post shore diagram ANSI SSFI SH300 stack


ANSI SSFH SH300 post shores loads table

We - at GBM - manufacture two different models of the ANSI SSFI SH300 post shores (US35 and US55).

These are classified according to maximum extension and capacity

Below are the technical features of each one of them.

IMPORTANT: Loads table's values represent the admissible load values according to ANSI SSFI SH300 standard, with safety factor 3 : 1

Dimensions table



US35 US55
Maximum extension ft. 11' 6" 18' 1"
Minimum extension ft. 6' 7" 10'
Inner diameter in. 2.5 3.0
Outer diameter in. 2.5 3.0
Weight lbs 46.0 74.5


Extension
(meters)

Extension
(feet)
US35
2,07 - 3,50 m
(kN)
US55
2,34 - 4,00 m
(kN)
5,50 18' 1"
4820
5,30 17' 5"
5610
5,15 16' 11"
6080
5,00 16' 5"
6630
4,85 15' 11"
7000
4,70 15' 5"
7790
4,55 14' 11"
8480
4,40 14' 5"
9060
4,25 13' 11"
9810
4,10 13' 5"
10440
3,95 13'
11370
3,80 12' 6"
12630
3,65 12'
13150
3,50 11' 6" 9760 14270
3,35 11' 11420 14810
3,20 10' 6" 12830 14810
3,05 10' 13850 14810
2,90 9' 6" 14480
2,75 9' 14860
2,60 8' 6" 15620
2,45 8' 16510
2,30 7' 7" 16510
2,15 7' 1" 16510
2,00 6' 7" 16510

Would you like to view the full GBM post shores catalogue?

Download the full catalogue in pdf format (5 MB)

Or go straight to the online version.

GBM Post Shores: Data Sheet

GBM post shore specifications, data sheet & capacity tables: maximum extension, minimum extension, inner tube, outer tube, weight, compression... If you want to know it all, just...

Download the datasheet of our post shores (PDF / 0.1 MB)

Related products

News

GBM's shipbuilding scaffoldings

GBM's shipbuilding scaffoldings

Shipyards are complex and demanding environments, requiring specialised solutions such as GBM's shipbuilding scaffolding.
Post shores required to sustain a slab: guidelines on how to establish distances, classes and quantities.

Post shores required to sustain a slab: guidelines on how to establish distances, classes and quantities.

At what distance should the post shores for sustaining a slab be positioned? Which is the appost shoreriate class? How many post shores do I need for an appost shoreriate work? These are not trivia questions. Here is a guideline to help you get the right answers.
Multidirectional scaffolding GBM certified EN 17067:2013

Multidirectional scaffolding GBM certified EN 17067:2013

The ideal solution for the design and construc- tion of complex scaffolding

News

More than 100 accessories for post shores, scaffoldings, couplings, formworks and stacking pallets

GBM Contacts: info, prices & quotes

Would you like further information on GBM products? Ask anything!